The tapered hexagon-cut 1.57CT. salt and pepper diamond is set to our new Riley setting. The Riley features a low-profile setting built on a sparkly half eternity band. The minimalistic design allows your favorite bands to sit flush against the ring at a much lower height than any traditional engagement ring. Pair this ring with the Solaris Pavé Half-Eternity Ring, Anais Half-Eternity Ring or Round Smooth Band.
• Center stone 1.57 CT. natural, conflict-free, never-treated hexagon, salt and pepper diamond.
• Band - 0.11CTW. GHSI, conflict-free, natural, never-treated diamonds.
• Solid 14K gold.
• 1.7mm round band.
• Total ring height 4.5mm
• This item is one of a kind.
• Current processing time: 14 business days.
Remove when washing, showering, swimming or using any chemicals, perfumes, hair or skin care products. Avoid making hard contact with solid surfaces.
Mix a small amount of dish soap with seltzer water in a bowl, then soak jewelry pieces in the solution for 5-10 minutes. Use a soft toothbrush to remove grime.
Store in a sealed plastic bag or a ring box. Ultrasonic and steam cleaner safe.
The best way to work out your ring size is to measure the inner diameter of one of your own rings. Then look at our chart to see which size has the closest measurements. Another way is to wrap a 5mm wide piece of paper around your finger. Stick the paper together so that you can move it up and down the finger. This is to make sure you can get it past the knuckle, then take the piece of paper off and measure the inner diameter. Please refer to our ring size chart to help you with sizing.
|US/Canada||Circumference inches||Circumference mm||UK/Australia||Germany||France||Korea, Japan, China|
|1 1/2||1.58||40.2||C||12 3/4||40 1/2|
|2||1.64||41.5||D||13 1/4||41 1/2||2|
|2 1/2||1.68||42.7||E||13 3/4||42 3/4||3|
|3 1/2||1.79||45.2||G||14 1/2||45 1/4|
|4||1.84||46.5||H 1/2||15||46 1/2||7|
|4 1/2||1.89||47.8||I 1/2||15 1/4||47 3/4||8|
|5||1.94||49.0||J 1/2||15 3/4||49||9|
|5 1/2||1.99||50.2||L||16||50 1/4|
|6 1/2||2.09||52.8||N||17||52 3/4||13|
|7||2.15||54.0||N 1/2||17 1/4||54||14|
|55.3||O 1/2||17 1/2||55 1/2||15|
|56.6||P 1/2||18||56 3/4||16|
|8 1/2||2.3||57.8||Q 1/2||18 1/2||58||17|
|9||2.35||59.1||R 1/2||19||59 1/4||18|
|9 1/2||2.4||60.3||S 1/2||19 1/2||60 1/2||19|
|10||2.46||61.6||T 1/2||20||61 3/4||20|
|10 1/2||2.5||62.8||U 1/2||20 1/4||62 3/4||22|
|11||2.57||64.1||V 1/2||20 3/4||64 1/4||23|
|11 1/2||2.61||66.0||W 1/2||21||66||24|
|12||2.66||67.2||Y||21 3/4||67 1/4||25|
Need to resize your ring? No problem! You can purchase a resizing service and round-trip shipping labels here.
Once we receive your ring, it will be inspected and resized using genuine 14K materials at our studio and the service will not void your warranty. If your ring needs to be increased more than two sizes, additional fees may be incurred. The resizing service is only available for Jamie Park Jewelry merchandise.
These simple instructions tell you how to measure your wrist properly so you can be sure your bracelets will fit right.
When measuring for bracelets, measure tightly where your wrist is broadest.
Measure your wrist with a flexible, soft tape measure just below the wrist bone (below the wrist bone is the area between your hand and the wrist bone). This is your actual wrist size, not your bracelet size.
Add approx. ¼ inches up to 1 inch ( .5" is average) to your actual wrist size, this is your approximate bracelet size. The more you add to your wrist size the more your bracelet will hang lower to your hand.
Using a flexible measuring tape*, Measure just above (towards elbow) the wrist bone, then add approx. ¼ inch to 1 inch ( .5" is average) depending on how tight you like your bracelets to fit. That is the size bracelet you would wear.
If you don't have a tape measure handy, use a strip of paper or thin string, and mark it where it overlaps on your wrist. Then lay the strip flat to measure up to the mark using any ruler.